US Robotics 56K INTERNAL VOICE FAXMODEM - QUICK FOR WINDOWS REV 1.2 Provozní pokyny Strana 46
- Strana / 112
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
3-10 LIFEPAK 500 Automated External Defibrillator Operating Instructions
Using the LIFEPAK 500 AED
PATIENT CARE TRANSFER TO A DIFFERENT DEVICE
To transfer patient care between devices equipped with identical therapy cable connectors:
1 Turn off the device connected to the patient.
2 Leave the defibrillation electrodes on the patient; disconnect the electrodes from the therapy cable
or the device.
3 Connect the therapy electrodes to the next device.
To transfer patient care between devices not equipped with identical therapy cable connectors:
1 Turn off the device connected to the patient.
2 Remove the defibrillation electrodes currently on the patient.
3 Apply defibrillation electrodes that are compatible with the receiving device.
4 Follow the instructions for the receiving device.
TROUBLESHOOTING DURING PATIENT CARE
For troubleshooting during patient care, refer to Table 6-1, page 6-2.
- Operating Instructions 1
- OPERATING INSTRUCTIONS 3
- IMPORTANT 4
- Revision History 4
- TABLE OF CONTENTS 5
- LIST OF FIGURES 7
- LIST OF TABLES 9
- ABOUT DEFIBRILLATION 12
- OPERATOR CONSIDERATIONS 12
- INDICATIONS FOR USE 12
- ON/OFF, ANALYZE [optional] 13
- ANALYZE 2 13
- DECLARATION OF CONFORMITY 15
- SAFETY INFORMATION 17
- GENERAL WARNINGS AND CAUTIONS 18
- Safety Information 20
- GETTING READY 21
- ANALYZE 22
- OK indicator disappears 23
- ABOUT BATTERIES 25
- Battery Installation 25
- Battery Removal 25
- 24MAY97 12:36:09 26
- DEFINING SETUP OPTIONS 27
- Device ID 27
- Modem Phone Number 27
- Modem Selection 27
- Modem Initialization String 28
- Energy Sequence 28
- Energy Protocol 28
- Display Energy 29
- Auto Analyze 29
- CPR Time 29
- Pulse Prompt 29
- CPSS during CPR 30
- Motion Detection 30
- Asystole Detector 30
- Audio Recording 30
- Paper Size 30
- Incident ID 31
- Audio Alert 31
- Transfer Setup 31
- FACTORY DEFAULT SETTINGS 31
- CHANGING SETUP OPTIONS 32
- Getting Ready 33
- 2 Getting Ready 33
- Transfer Cable 35
- LIFEPAK 500 AED 35
- Connector Cover 36
- Cable Connector 36
- USING THE LIFEPAK 500 AED 37
- WARNINGS AND CAUTIONS 38
- AED OPERATION 39
- ELECTRODES message 39
- AED PROMPTS 40
- Using the LIFEPAK 500 AED 41
- 3 Using the LIFEPAK 500 AED 41
- Subsequent Analysis Cycles 42
- No Shock Advised 42
- After CPR Time 44
- CLEAR, ANALYZING 44
- Shock Counter 44
- DATA MANAGEMENT 47
- Overview of Data Storage 48
- Data Management 49
- 4 Data Management 49
- Overview of Data Retrieval 50
- Required Resources 50
- Setup Options 51
- Procedure for Sending Data 51
- SENDING DATA TO A PRINTER 54
- Procedure for Printing 54
- Examples of Printed Reports 55
- Event Log Report 56
- Event Log Summary 56
- Comments: 56
- END OF REPORT 60
- MAINTENANCE 61
- INSPECTION 62
- CLEANING 63
- xx.xx message 63
- Service Indicator and Message 64
- Power-On Self-Test 64
- Auto Tests 65
- Test load 66
- BATTERY MAINTENANCE 67
- Nonrechargeable Battery Pak 67
- Maintenance 68
- Rechargeable Battery Pak 69
- CAUTIONS! 71
- Possible battery damage 71
- ELECTRODE STORAGE 72
- SERVICE AND REPAIR 72
- Product Recycling Information 72
- WARRANTY 72
- Description Part Number 73
- SPECIFICATIONS 74
- 5 Maintenance 75
- 360 joules into 50 ohms 77
- VENTRICULAR TACHYCARDIA 78
- Background 78
- Conclusions 79
- TROUBLESHOOTING 81
- ° and 50°C 83
- ° to 122°F) 83
- DETECTOR 85
- FOR SIGNS OF 85
- DURING CPR 85
- DETECTION 85
- Troubleshooting 86
- CLEAR, PUSH TO 87
- APPENDIX A 89
- SHOCK ADVISORY SYSTEM 89
- Shock Advisory System 91
- Appendixes 91
- Intermediate: 92
- Control of Shock Therapy 93
- APPENDIX B 95
- Instruction 97
- Recommended 97
- Corrective Action 97
- Initials 97
- APPENDIX C 99
- FAST-PATCH 101
- defibrillation cable 101
- Instructions for Use 101
- Disconnecting from electrodes 102
- APPENDIX D 103
- QUIK-COMBO 105
- ALERT setup option, 2-11 107
- RECORDING screen, 2-14 107
- ANALYZE screen, 2-13 107
- DETECTOR screen 107
- DETECTOR setup 107
- SETUP screen, 2-15 110
- PN 3005338-022 112
Související produkty a manuály pro ne US Robotics 56K INTERNAL VOICE FAXMODEM - QUICK FOR WINDOWS REV 1.2
ne US Robotics USR2450 Uživatelský manuál
(6 stránky)
(6 stránky)
ne US Robotics SportsterVoice Provozní pokyny
(192 stránky)
(192 stránky)
ne US Robotics USR2410 Uživatelský manuál
(107 stránky)
(107 stránky)
ne US Robotics USR8700 Instalační příručka
(36 stránky)
(36 stránky)
ne US Robotics SportsterVoice Provozní pokyny
(154 stránky)
(154 stránky)
ne US Robotics USR8500 Instalační příručka
(48 stránky)
(48 stránky)
ne US Robotics SportsterVoice Uživatelská příručka
(58 stránky)
(58 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce